How to maintain roofs and gutters?

Learn to maintain and repair your roofs and gutters to prevent leaks or moisture problems in winter and have your home ready for rain. In the autumn and before the winter begins it is essential to evaluate the condition of the roof. This means repairing the damaged tiles or plates as well as cleaning the gutters and downspouts. This is the best way to prepare for the rainy season and prevent moisture problems inside and outside the home. Before making any repairs to roofs or gutters it is very important to take appropriate safety measures to prevent accidents during work or call for Palestine Roofing Companies experts immediately. Evaluate the best way to climb the roof and access the gutters. Use a ladder in good condition and lease a scaffold to have more stability and comfort during work.

How to clean gutters and drops?

With your hands and using gloves remove the leaves and branches that may be blocking the passage of water through the gutters. Pass a brush with fine bristles to scrape glued dirt. For the cleaning of the gutters you can use brushes with hard or plastic bristles. Everything will depend on the dirt and it is necessary to evaluate that the use of brushes of steel bristles does not break the gutters of tinplate or the PVC.

Wash and unclog

You can use a hose with a piston nozzle or a pressure washer. The water pressure will wash the inside of the gutters and down, drag waste and uncover it in case of obstruction. Using this method you can also check the status of the gutters and drops if they have leaks or holes that must be fixed.

Repair leaks and fissures

You can seal fissures with a grommet applied with a caulking gun or spatula. It is recommend you to protect the head of the screws with a cover as it is one of the areas where you can filter water and moisture.

Conclusion: How to repair a fiber cement roof?

Clean the roof with a broom and brush. The fungi are removed with chlorine diluted in water in a ratio of 1 to 10. Sponge this mixture over the fungi, scrub to eliminate completely. Let dry and the fissures will be exposed.Fissures are usually caused by pressing the screw a lot or by walking on the roof. These fissures continue to be enlarged by the pressure of water on the structure. As a solution to the emergency you can apply an epoxy adhesive which has a catalyst that when it hardens is more rigid. If it were a more flexible one then the iron would continue working and the crack would grow.

Comments are closed.

  • Partner links